Diagonal plows
USING
The diagonal plough is designed to change the direction of flow of bulk materials (from a conveyor belt to a loading hopper) with a bulk density of no more than 2 g/cm3, a fraction size of no more than 3 mm at a temperature of 0° to 50°. The diagonal plough cannot be used for transporting highly abrasive materials, such as glass. The diagonal plough has two designs left and right, depending on the direction of material feed.
technical specifications
| Parameters | SP – 500 – P (L) | SP – 650 – P (L) |
|---|---|---|
| Conveyor belt width, mm | 500 | 650 |
| Working pressure in the pneumatic system, MPa | 0,5 ± 0,1 | 0,5 ± 0,1 |
| Air consumption, normalized to normal pressure, taking into account the coefficient of heat loss of 1,4, m3/min | 0,0014 | 0,0035 |
| Pneumatic cylinder piston diameter, mm | 50 | 80 |
| Pneumatic cylinder piston stroke, mm | 100 | 100 |
| Power supply voltage, V | 220 ± 22 | 220 ± 22 |
| Consumed power, W | 8,5 | 8,5 |
| Weight, kg, max | 63,5 | 72,5 |
specifications
